New Kamikaze CNC image released
Beaglebone | Manga Screen | Redeem | Replicape | Toggle

New Kamikaze CNC image released

Kamikaze is a Debian-based eMMC flasher image for BeagleBone Black. It is a complete solution for Replicape and Manga-Screen aiming to contain all software needed to slice a model and print it without installing any additional software. And it has now been updated! The latest image has an updated Octoprint 1.2 which now has CuraEngine…

mangascreen
Manga Screen

mangascreen

Manga Screen is a 4.3″ HDMI compatible LCD screen powered by USB. The kickstarter campaign has ended, but be sure to check back in few weeks, since there will be a new batch available through the web-shop once the first batch has been delivered.

More Replicapes + new Octoprint and Redeem packages
Beaglebone | Manga Screen | Reason | Redeem | Replicape

More Replicapes + new Octoprint and Redeem packages

CircuitCo just sent the shipment notification for 48 shiny new Replicapes, so they will be in store in a couple of days! With this batch we’ll also offer FedEx shipping at 70% discount. In other news, Octoprint 1.1.0 was recently pushed to master and I’ve update the package feed with the latest changes. The most…

New BBB flasher with kernel 3.14, Native path planner and a web UI
Beaglebone | Clutter | Manga Screen | Redeem | Replicape | Toggle

New BBB flasher with kernel 3.14, Native path planner and a web UI

The last weeks have been spend making a new BeagleBone Black flasher image, one with an updated kernel, the latest Redeem and a whole lot of graphics goodies. The image with instructions can be found here. The most important changes from the last image is the native path planner in Redeem. Mathieu Monney has done…

Replicape BBB-flasher ready for download
Beaglebone | Manga Screen | Replicape

Replicape BBB-flasher ready for download

Yes! The Thing/Replicape BBB-flasher image is now finally ready for alfa testing! This flasher image has everything you need for using the Replicape for controlling a 3D-printer or other CNC-machine. It’s a minimal Angstrom SystemD image with Redeem, Toggle, CuraEngine and Octoprint pre-installed. There is no X or Wayland due to the missing SGX drivers…

Replicape printing a tree frog
Beaglebone | Clutter | Manga Screen | Replicape | spline | Toggle

Replicape printing a tree frog

Hey, I took a video of the Replicape finishing a print last night: The video shows the Thing printer, which is a demo-printer for displaying the capabilities of the Replicape and the Manga Screen and also for developing Spline, which is a all-metal remotely cooled dual Bowden extruder that I’m working on. Here is a…